45' HC wide body, 102in
45-Fuß-High-Cube, 102 Zoll breit
Sieben Zoll breiter im Inneren als ein ISO-45, und genau darum geht es: 99 Zoll nehmen zwei 48-Zoll-Paletten nebeneinander auf, 92 Zoll nicht. Seaboard und Crowley fahren sie aus Südflorida, auf den Karibik- und Mittelamerika-Trades ist ein 45 also oft diese Box. Die Payload-Angabe ist das gesetzliche Straßengewicht, nicht die Tragfähigkeit des Containers.
Außen, innen, und die Tür
So sieht es aus
Spezifikation
| Maß | 45-Fuß-High-Cube, 102 Zoll breit |
|---|---|
| Außenlänge | 540″ 45′ |
| Außenbreite | 102″ 8′ 6″ |
| Außenhöhe | 115″ 9′ 7″ |
| Innenlänge | 534″ 44′ 6″ |
| Innenbreite | 99″ 8′ 3″ |
| Innenhöhe | 107″ 8′ 11″ |
| Türbreite | 98″ 8′ 2″ |
| Türhöhe | 107″ 8′ 11″ |
| Leergewicht | 10,220 lb |
| Max. Zuladung | 56,730 lb |
| Zulässiges Straßengewicht | 41,700 lb |
| Max. Gesamtgewicht | 67,200 lb |
| Volumen | 3,268 ft³ |
| Chassis | 45ft or extendable |
Werte veröffentlicht von Crowley. Das Leergewicht schwankt trotzdem je nach Bauart und steht auf der Tür der Einheit, die Sie bekommen. Schicken Sie uns die Containernummer, wir prüfen gegen die echte.
What the 102 in wide 45 is
This is a 45 ft high cube built 102 in wide instead of the usual 96. Outside it runs 45 ft long, about 8 ft 6 in wide and 9 ft 7 in tall. Inside, the published figures are roughly 44 ft 6 in by 8 ft 3 in by 8 ft 11 in, giving around 3,268 cu ft, and the door opening is about 8 ft 2 in wide by 8 ft 11 in tall, which is unusually generous on height for a container.
On the Caribbean and Central America trades through PortMiami and Port Everglades it is a common box rather than a curiosity, so a booking that says only 45 may well mean this one. Tare runs around 10,220 lb on the published figures, and as with any container the tare that governs your load is the one stencilled on the door of the unit you actually receive.
Why seven inches changes the load plan
Two standard 48 in pallets need 96 in of width. An ordinary container gives you about 92 in inside, so they do not go side by side and the whole floor plan has to be built around turning pallets and accepting dead space. This box gives you 99 in, so they do, all the way down 44 ft 6 in of floor. That is not a marginal gain: it is a different way of loading the same freight.
Against an 8 ft wide 45 it is about 225 more cu ft on nearly identical outside dimensions, and against a 40ft high cube it is more of everything. The comparison that actually matters is pallets landed rather than cubic feet quoted, and that is where the wide body separates from its neighbours. If your cargo is not palletized, the advantage shrinks to the seven inches themselves and the choice goes back to whichever box is available on the trade.
What people get wrong: width has no margin, and the rating is not the road limit
102 in is the legal highway width, not a width that needs a permit and not a width with anything spare. An ordinary 8 ft container travels with six inches of slack against the limit, and this one travels with none. Nothing about that is a problem on an ordinary route, but it means a box seated slightly off on a chassis, a narrow gate, a construction lane or a tight dock approach has less room to be wrong in than the crew may expect.
The other trap is the weight column. The container is rated at 67,200 lb gross, and that is a sea and stacking figure. The number that decides whether a truck is legal in Florida is the 80,000 lb gross of the whole combination, which leaves about 41,700 lb of cargo after the tractor, a 45 ft chassis and the box's own tare, the figure Crowley publishes for this box. Loading to the rating rather than the road figure is how a legally stuffed container becomes an illegal vehicle at the first scale.
What to send to get it booked
Say 102 in, or say wide body, at the first ask. The chassis question and the load plan both change with that one word, and a 45 assumed to be the ISO box gets planned with the wrong interior width. Then the container number, the steamship line and the terminal, which decide the gate requirement and the appointment.
After that the usual: delivery address, last free day, and the cargo weight as it reads on the bill of lading rather than a guess. If the receiving site is tight, describe it, because this is a 45 ft box at full legal width and the approach matters more than the door. If the freight is palletized, the pallet size and the count are worth sending too, since that is what the extra seven inches is being bought for.
Work it out first
Kommt von
Geht nach
Fragen
Klare Antworten
How wide is a 102 in container inside?
About 8 ft 3 in, which is 99 in, against roughly 92 in in an ordinary 8 ft wide box. Seven inches does not sound like much until you put pallets in it. Two 48 in pallet edges need 96 in and they fit here with room to breathe, where in a 96 in wide container they do not fit at all. That single fact is the reason the wide body exists and the reason the two sizes are not interchangeable.
Is a 102 in wide container legal on the road without a permit?
Yes. 102 in is the legal highway width in the United States, so the box travels as an ordinary load and no width permit is involved. What it does not have is margin. An 8 ft wide container has half a foot of slack against the limit and this one has none, so a shifted box on a chassis, a tight gate or a narrow bridge approach is less forgiving than the crew may be used to.
Where do 102 in wide 45ft containers come from?
They run heavily on the Caribbean and Central America services out of PortMiami and Port Everglades, which is why South Florida sees them far more often than most of the country does. If your booking is on one of those trades and says 45, there is a real chance this is the box rather than the 8 ft wide ISO version, and it is worth confirming before a load plan is drawn around the wrong interior width.
Can a 45ft wide body be loaded at a standard dock?
Usually yes, since the door opening is around 8 ft 2 in wide and dock levellers and forklifts are not troubled by the extra few inches of box width. The thing to check is the approach rather than the door: a wider box on a 45 ft chassis needs a straighter run into the bay. As always, the tightest opening on the trip is worth measuring in advance, and it is often the receiver's door and not the container.
Is the payload of a wide body 45 lower than its rating?
Much lower, and the two numbers answer different questions. The box is rated to 67,200 lb gross, which is a sea figure covering how the steel and the corner castings are built. On a Florida road the limit is the 80,000 lb legal gross of the whole combination, which leaves roughly 41,700 lb of cargo once the tractor, a 45 ft chassis and about 10,220 lb of tare are taken out. Load to the road figure.
Welche Innenmaße hat ein 45-Fuß-High-Cube, 102 Zoll breit?
Innenlänge, -breite und -höhe stehen in der Spezifikationstabelle auf dieser Seite, neben den Außenmaßen und der Türöffnung. Die Türöffnung ist das Maß, das entscheidet, ob eine Maschine hineinpasst, und sie ist kleiner als der Innenraum.
Welches Chassis braucht ein 45-Fuß-High-Cube, 102 Zoll breit?
45ft or extendable. Wir bringen das Chassis mit, eine Buchung hängt also nicht davon ab, was das Terminal an dem Morgen verfügbar hat.
Geht das auch mit Übergewicht?
Ja, auf dem richtigen Chassis und mit der richtigen Genehmigung. Übergewicht ist eine eigene Frage, unabhängig von der Containergröße, und die Häfen haben zusätzlich zu den Grenzen des Bundesstaats ihre eigenen.
Woher ziehen Sie 45-Fuß-High-Cube, 102 Zoll breit?
Port of Miami, Port Everglades, Port of Palm Beach, POMTOC, South Florida Container Terminal, Seaboard Marine, Florida International Terminal, Port Everglades Terminal, Crowley, King Ocean, MSC, Tropical Shipping, Antillean Marine, FEC Port Everglades ICTF, FEC Hialeah rail ramp and CSX ramp.
Was ist der last free day?
Der letzte Tag, an dem Ihr Container im Terminal stehen darf, bevor Lagerkosten anfallen. Wird er verpasst, läuft das demurrage täglich weiter, und deshalb ist ein pre-pull fast immer günstiger als Warten.
Was ist ein pre-pull?
Wir holen den Container aus dem Terminal, bevor Sie so weit sind, und stellen ihn auf einem Hof ab. Das stoppt das demurrage zu Terminalsätzen und nimmt den Druck von Ihren Annahmezeiten.
Was ist der Unterschied zwischen demurrage, per diem und detention?
Drei verschiedene Kosten von verschiedenen Parteien. Demurrage berechnet Ihnen das Terminal, weil die Ladung nach Ablauf der Freizeit noch hinter dem Tor steht. Per diem berechnet Ihnen die Reederei, weil ihr Container über die Freizeit hinaus draußen ist. Detention ist die Zeit des Frachtführers, berechnet, wenn ein Fahrer an Ihrer Rampe über das freie Zeitfenster hinaus wartet. Sie können gleichzeitig laufen, und so wird eine Rechnung schnell unschön.
Wie bekomme ich einen Preis?
Schicken Sie Strecke, Equipment, Containergröße und Hafen, dann kommt eine Zahl zurück. Angebote und Disposition laufen rund um die Uhr unter quotes@dariaslogistics.com.
Was ist in einem drayage-Angebot wirklich enthalten?
Der Transport selbst, dazu die Nebenkosten, die später überraschen: Chassis, pre-pull, per diem, demurrage, detention und Lagerung. Wir nennen sie lieber vorher, als sie später auf eine Rechnung zu setzen.