20' tank
ISO tank
خزان داخل هيكل 20 قدماً، للسوائل السائبة. غالباً ما يكون ثقيلاً، وكثيراً ما يكون مواد خطرة، والأوراق فيه لا تقل أهمية عن المعدة نفسها.
من الخارج ومن الداخل والباب
شكلها
المواصفات
| القياس | ISO tank |
|---|---|
| الطول الخارجي | 240″ 20′ |
| العرض الخارجي | 96″ 8′ |
| الارتفاع الخارجي | 102″ 8′ 6″ |
| الوزن الفارغ | 8,800 lb |
| أقصى حمولة | 58,400 lb |
| أقصى وزن إجمالي | 67,200 lb |
| الشاسيه | Standard 20ft, tri-axle if it rides heavy |
هذه أرقام اسمية لهذا النوع من المعدات. الحاويات الفعلية تختلف حسب المصنّع والخط الملاحي وسنة الصنع، والوزن الفارغ مطبوع على باب الوحدة التي تصلك. أرسل لنا رقم الحاوية ونتحقق من الوحدة الفعلية.
What an ISO tank is
An ISO tank is a cylindrical pressure vessel held inside a 20 ft container frame, so a bulk liquid or gas can be handled by the same cranes, chassis and terminals as any other box. The frame measures about 20 ft by 8 ft by 8 ft 6 in and locks at the same four corners. Tare on a typical unit is near 8,800 lb, which is heavy for a 20 ft footprint and all of it is structure.
There are no interior or door dimensions, because there is no interior in the usual sense. What describes a tank instead is its data plate: capacity, test pressure, the date of its last inspection, and what it is approved to carry. Most standard chemical tanks hold somewhere around 5,500 to 7,000 US gallons, with the exact figure stamped on the unit rather than assumed from the type.
Four types, and why the type decides everything
A standard chemical tank is the common unit and the one people picture. A food grade tank is built and cleaned to a documented standard, and it travels with a cleaning certificate showing what it last carried and how it was washed. A pressurised gas tank is a different vessel with a different test regime. A cryogenic tank, for refrigerated liquefied gases, is different again.
Those differences drive availability far more than they drive price. A cryogenic unit also vents as it travels, which constrains where it can stand and for how long, so the schedule is part of the equipment question rather than separate from it. Saying which type you have and what is in it is the first useful sentence in any tank conversation, because the answer to whether it can move this week follows the type rather than the frame.
What people get wrong: the fill level, and the weight
A tank is not loaded to whatever volume is convenient. Filled somewhere between roughly 20 and 80 percent, the liquid inside has room to run from end to end, and under braking that moving mass arrives at the tank head hard enough to matter. The rule is to load either below about 20 percent or above about 80 percent, and a shipper planning a half load usually finds out about it late.
Weight is the second trap and it is arithmetic. Liquid is dense, the frame is short, and a 20 ft unit puts its whole load over one set of tandems, where the 34,000 lb tandem cap and the bridge formula bind long before the combination gets near 80,000 lb. A tank that loaded legally at origin and crossed an ocean without comment can still need a tri-axle chassis and an overweight permit for a delivery of a few miles in South Florida.
What to send to get it booked
Start with the type: chemical, food grade, pressurised gas or cryogenic. Then the product, the UN number and the placard class if it is regulated, because a placarded load is routed rather than simply dispatched, and in Miami that includes the fact that placarded freight cannot use the port tunnel and leaves over the bridge instead.
Add the tank number, the steamship line and the terminal, the gross weight of the loaded unit rather than the product weight alone, and the fill percentage. Say whether the tank needs heating, whether it vents, and what the receiving site can do: a tank discharges into something, and the pump, the connection and the hose at the far end are part of the job rather than a detail to settle on arrival.
تخرج من
تذهب إلى
أسئلة
إجابات مباشرة
How much does an ISO tank hold?
Most standard chemical tanks in a 20 ft frame hold somewhere between about 5,500 and 7,000 US gallons, and the exact capacity is stamped on the tank's own data plate along with its test pressure and its last inspection. Capacity is rarely what limits a load, though. Weight is. A tank filled to its volume with a dense liquid will exceed what the road allows long before the shell runs out of room.
Why does an ISO tank have to be filled under 20 percent or over 80 percent?
Surge. A part filled tank lets the liquid run from end to end, and that moving weight arrives at the tank heads with real force under braking or in a turn. Loading either below about 20 percent or above about 80 percent keeps the free surface small enough to control. It is a rule people discover late, usually when a shipper wants to send a convenient half load, and it is not negotiable on the road.
Are all ISO tanks the same?
No, and the differences matter more than most shippers expect. A standard chemical tank, a food grade tank, a pressurised gas tank and a cryogenic tank for refrigerated liquefied gases are four distinct pieces of equipment with different fittings, different test regimes and very different availability. Whether a shipment can move this week usually depends on which type it needs rather than on the fact that it is a tank at all.
What makes a food grade tank different from a chemical tank?
The cargo history and the cleaning regime as much as the steel. A food grade tank is dedicated or cleaned to a documented standard, and the cleaning certificate travels with the unit as evidence of what was in it last and how it was washed out. A chemical tank may carry a product that permanently disqualifies the shell from food service. The certificate, not the appearance of the tank, is what a receiver will ask for.
Why does an ISO tank often ride overweight?
Because liquid is dense and the frame is short. Tare is around 8,800 lb before anything goes in, and a 20 ft unit concentrates its whole weight over one set of tandems, where the 34,000 lb cap and the bridge formula bind well before the combination reaches 80,000 lb. So a tank that is entirely legal at sea frequently needs a tri-axle chassis and an overweight permit for a short delivery in South Florida.
ما الشاسيه الذي يحتاجه ISO tank؟
Standard 20ft, tri-axle if it rides heavy. نحن نحضر الشاسيه معنا، فلا يتوقف الحجز على ما هو متوفر في المحطة ذلك الصباح.
هل تنقلونه بوزن زائد؟
نعم، على الشاسيه الصحيح وبالتصريح الصحيح. الوزن الزائد حديث منفصل عن مقاس الحاوية، وللموانئ حدودها الخاصة فوق حدود الولاية.
من أين تسحبون ISO tank؟
Port of Miami, Port Everglades, Port of Palm Beach, POMTOC, South Florida Container Terminal, Seaboard Marine, Florida International Terminal, Port Everglades Terminal, Crowley, King Ocean, MSC, Tropical Shipping, Antillean Marine, FEC Port Everglades ICTF, FEC Hialeah rail ramp and CSX ramp.
ما هو الـ last free day؟
آخر يوم يمكن أن تبقى فيه حاويتك داخل المحطة قبل أن تبدأ رسوم التخزين. إذا تجاوزته، يبدأ الـ demurrage بالتراكم يومياً، ولهذا فإن الـ pre-pull أرخص من الانتظار في أغلب الحالات.
ما هو الـ pre-pull؟
نسحب الحاوية من المحطة قبل أن تكون جاهزاً لها ونحفظها في ساحة. هذا يوقف الـ demurrage بأسعار المحطة، ويرفع الضغط عن جدول الاستلام عندك.
ما الفرق بين الـ demurrage والـ per diem والـ detention؟
ثلاثة رسوم مختلفة من جهات مختلفة. الـ demurrage هو المحطة تحاسبك على بقاء البضاعة داخل البوابة بعد المدة المجانية. الـ per diem هو الخط الملاحي يحاسبك على بقاء حاويته خارج المحطة بعد المدة المجانية. الـ detention هو وقت الناقل، ويُحتسب حين ينتظر السائق عند رصيفك بعد انتهاء النافذة المجانية. وقد تجري كلها في وقت واحد، وهكذا تصبح الفاتورة سيئة بسرعة.
كيف أحصل على سعر؟
أرسل الخط، والمعدة، ومقاس الحاوية، والميناء، ونرد عليك برقم. التسعير والتشغيل على مدار 24 ساعة على quotes@dariaslogistics.com.
ما الذي يشمله عرض سعر الـ drayage فعلاً؟
النقلة نفسها، إضافة إلى الرسوم الإضافية التي يفاجأ بها الناس لاحقاً: الشاسيه، والـ pre-pull، والـ per diem، والـ demurrage، والـ detention، والتخزين. نفضّل تسميتها من البداية على إضافتها إلى فاتورة.